[FCU INI File]
Build#256

[Display]
Title=On
                              / Enables/Disables Title Bar. 
WindowName=Project Magenta FCU - Build 256
Topmost=Off
                              / Will set the FCU program on top 
                              / of any other window.
FSWindow=Off
                              / Will try to start the program within 
                              / the FS Window.
Minimized=Off
                              / Start the program minimized. 

[User]
CycleMilliseconds= 50
                              / Allows you to set how fast the 
                              / FCU runs, setting a higher values 
                              / makes the FCU run slower but it 
                              / also makes it less responsive. 
Top=-45
Left= 2415
Width= 12915
Height= 3495
                              / Sets the coordinates of the FCU's 
                              / bitmap position.
ThrottleTop= 3915
ThrottleLeft= 15690
                              / Sets the coordinates of the Throttle 
                              / Bitmap, if it is enabled. 
DelayMouseClick=On
                              / This option will slow down the 
                              / progam's response to mouse clicks 
                              / on the various knobs, may be needed 
                              / on some computers.
Font=pmabfcu
FontFactor= 1
                              / Allows you to set the size of the 
                              / fonts of the FCU's text display 
                              / (not the labels).
MultipleND=On
                              / Allows you to set more than one 
                              / EFIS ND modes at the same time, 
                              / i.e. APT, WPT, CSTR.

[AB Modes]
AirbusTypeControls=Off
                              / This setting will make the FCU 
                              / control pitch and bank as is done 
                              / on with the Airbus sidestick, i.e. 
                              / the current pitch and bank will 
                              / be maintained and sidestick deflection 
                              / increases/decreases it. The aircraft 
                              / does not level out by itself. 
AileronSensitivity= 100
ElevatorSensitivity= 100
AileronSensitivityLarge= 100
ElevatorSensitivityLarge= 100
                              / The higher the value for the joystick 
                              / sensitivity the more reactive it 
                              / will be to joystick input. The 
                              / 'large' value is for large deflections, 
                              / the first one for small deflections. 
GateSetsAT=Off
                              / Thrust gate set to IDLE will force 
                              / AT off when in the air. 
UseAtDisconnect=Off
                              / Will not allow pressing the AT 
                              / button to disconnect AT, use AT 
                              / disconnect on hardware instead 
                              / (command K020)
AutoSetGate=Off
                              / Will automatically set gate position 
                              / when above thrust reduction altitudeAtomatic 
                              / Resetting of the The throttle position 
                              / will be ignored and the thrust 
                              / gate is not automatically reset 
                              / depending on the throttle position. 
SetThrModes=Off
ThrTOGA= 0
ThrTHRMCT= 0
ThrCLB= 90
ThrIDLE= 5
ThrREVIDLE= 0
ThrFULLREV= 0
                              / When these values are set (between 
                              / 0 and 100) and SetThrModes=On then 
                              / the thrust gates are set accordingly. 
                              / E.g. Throttle is set to 78% of 
                              / full travel and ThrClimb=78 then 
                              / the the throttle lever is set to 
                              / the CLB gate
MapTo4Throttles=On
                              / When set, the throttle position 
                              / of the 4th throttle lever is the 
                              / one that is checked.

[Aircraft]
MinIAS= 0
                              / Minimum allowable airspeed that 
                              / can be set in the FCU. 
UsePanel=Off
                              / Needs to be set to On if the FS 
                              / FCU panel is used..
DefaultIAS= 0
DefaultAlt= 0
SpeedProtect=On
                              / When this is enabled, the speed 
                              / will not be allowed to be higher 
                              / than the min/max defined by the 
                              / MCDU and the aircraft configuration 
                              / file.
Flare= 45 
                              / Altitude above ground in feet at 
                              / which the flare is initiated. 
N1ref= 93.12 
N1TOref= 97 
N1GAref= 97 
N1CLBref= 88.3 
N1CRZref= 88.3 
ThrRedAlt= 1000 
                              / The above values are defaults that 
                              / are applied when no MCDU is detected. 
MaxROC= 6000 
MaxROD= 6000 
                              / Max Rate of Climb and Rate of Descent 
                              / to be used in OP CLB and OP DES 
HPA=On
NightPanel=Off
ShowThrottle=On
DisableAT=Off
                              / This will disable the Autothrust 
                              / via the FCU altogether. 
TOGATrim= 5
                              / Sets the default trim that will 
                              / be used by the FCU in FS for TOGA. 
FixedTrim= 1
                              / Fixes the trim at this value (from 
                              / +32 to -32) throughout the flight. 
Log=Off
                              / Enables logging to the FCU.LOG 
                              / file.
ThrottleLog=Off
                              / Enables SPEED mode logging to the 
                              / FCU.LOG file.
LogExt=Off
                              / Enables extended logging to the 
                              / FCUPROC.LOG file.

[Input]
MouseWheel=On
MouseWheelInvert=On
                              / Allows you to turn the knobs via 
                              / the Mouse Wheel, the direction 
                              / of the turn can be inverted as 
                              / well.

[Autopilot]
AP_BetaTest=Off
                              / The FCU will not use the FS autopilot 
                              / when this mode is enabled... for 
                              / tests only at this moment in time. 

[SerialConnection]
ElanComm= 0
FDS_G1_Comm= 0
CPFlightComm= 0

[EPIC]
DisableRemoteMCP=Off
;input type = joystick, axis