[Project Magenta Glass Cockpit INI file]
Build#276

[Display]
Title=Off
                              / Enables/Disables Title Bar. 
WindowName=ecam
                              / You can set the name in the Title 
                              / Bar here.
Topmost=Off
                              / Will set the GC program on top 
                              / of any other window.
FSWindow=Off

[OpenGL]

Quality=Hi
                              / When set to Hi, the display quality 
                              / is higher, enabling font and line 
                              / smoothing
Font=pmabgc
                              / For Backwards compatibility only. 
FontFactor= 1
                              / Defines the font factor, 1.1 would 
                              / be 10% larger
NavFontFactor= 1
                              / Defines the font size on the ND 
                              / display
FontQuality= 50
                              / From 0 to 100%, where 0 is fastest 
                              / display, 100 highest quality 
Benchmark=On
                              / Runs the Benchmark test on startup 
                              / (if not connected)
FontSmoothViaLines=On
FontSmoothViaPolygons=Off
                              / The fonts can be smoothed by drawing 
                              / lines around them or trying to 
                              / smooth the polygons, this depends 
                              / on your graphics driver 
BitmapSmooth=On
                              / If your graphics driver allows 
                              / it, the bitmaps can be smoothed 
AllowDimming=Off
                              / If your graphics driver allows 
                              / it, the display is dimmed depend 
                              / on the ElecOff setting in Offset 
                              / 0x510

[Network]

Type=CDU
                              / Sets the Aircraft Configuration 
                              / file, set it to CDU if you want 
                              / to control it from there, otherwise 
                              / reference a file, such as A320200 
                              / for A320200.TXT

[User]

Log=Off
                              / Error and access logs are saved 
                              / to ABPFD.LOG
UseTimer=Off
                              / This will slow down the Glass Cockpit 
                              / and give more processor time to 
                              / other programs
UseTimerFPS= 0
                              / *Approximate target FPS for the 
                              / UseTimer option
ShowControls=Off
                              / Allows you to display the flight 
                              / controls and other information 
                              / on the ECAM display
Overview=Off
                              / Will display current settings on 
                              / the ND after starting up 
Kgs=Off
                              / When no MCDU is active, you can 
                              / set KGS/LBS here
EPR=Off
                              / Displays EPR instead of N1 in the 
                              / ECAM
ShowThrGate=On
                              / Displays selected Throttle Gate 
                              / in ECAM
HideFreeze=Off
                              / Does not display Flight Freeze/ 
                              / Freeze when active
Framed=Off
FrameFile=
                              / Will draw the frame referenced 
                              / in 'Framefile' around the instruments 
MinIAS= 30
                              / Minimum IAS to be displayed on 
                              / the Speed Tape
LowerECAMActive=On
                              / If set to On, the upper display 
                              / will only show the main engine 
                              / page and no flaps gauge. 
LowerECAMF3=Off
                              / This will display the lower ECAM 
                              / on the F3 Page
StartElecOff=Off
StartElecSingle=Off
StartElecAvionics=On
                              / This will switch off the displays 
                              / until either a key is pressed or 
                              / the offset 0X510 is cleared 
                              / It can also check the Avionics 
                              / Flag within FS and enable the instruments 
                              / one after the other
DisableVSI=Off
                              / Disables the vertical speed indicator 
TCASRange= 40
TCASAltRange= 0
                              / Sets at which distance (NM) and 
                              / altitude (feet difference) other 
                              / aircraft are shown when TCAS is 
                              / active
TCASTimeout= 20
                              / Sets the timeout for the reading 
                              / of all aircraft data for TCAS, 
                              / might have to be set higher on 
                              / very slow systems
TCASAlertAltDiff= 0
TCASAlertNM= 0
TCASAlertSound=On
TCASWarnNM= 0
TCASWarnSound=On
                              / With these parameters you can control 
                              / the warning sounds in pmSounds 
                              / and the threshold for TCAS warnings 
                              / and alerts
Horizon=Green
Sky=Light
                              / Controls the colours of the artificial 
                              / horizon (red/brown/green) for the 
                              / lower part and (light/dark) for 
                              / the lower part
Magenta=Light
SkyRGB=
HorRGB=
StdBySkyRGB=
StdByHorRGB=
                              / You can set your own (R)ed (G)reen 
                              / (B)lue components for the horizon, 
                              / e.g. 0000FF is full blue, 88FF00 
                              / is part Red and full Green 
ISISMode=On
                              / Enables the Intergrated Standby 
                              / Instrument System (replacing the 
                              / other instruments)
FDSmooth=On
                              / Controls the movement of the Flight 
                              / Director
DH= 430
                              / Controls the colours
CoPilot=Off
                              / Set Copilot=On if you want the 
                              / Glass Cockpit to display the first 
                              / officer instruments
SeparateFD=Off
                              / Allows you to set FD and LS for 
                              / F/O separately
AirportsAlways=Off
                              / Will display airports at any ND 
                              / range
ShowSweep=On
                              / Shows/Hides Radar Sweep 
RefBankClean= 25 
RefBankFlaps= 18 
                              / Autopilot reference bank during 
                              / turns when clean or when flaps 
                              / are set
ShowChrono=On
ChronoX1=-270
ChronoY1= 100
ChronoZ1= 1
ChronoX2=-270
ChronoY2= 70
ChronoZ2= 1
ChronoX3=-270
ChronoY3= 40
ChronoZ3= 1
                              / Shows/Hides and positions Chronometer 
                              / on Lower ECAM
                              / X/Y position can be checked by 
                              / pressing 'C', the mouse position 
                              / is saved to the clipboard and can 
                              / be pasted into a text file with 
                              / Ctrl-V
                              / Z position is a factor, and 2 would 
                              / mean the display is twice as big 
Rotate=Left
                              / Allows rotation of all displays 
                              / (Left/Right/No)

[Terrain]
Terrain=Off
                              / Enables/Disables EGPWS/Terrain 
                              / display
TerrMode= 1
TerrColour= 0
Terr3D=Off
TerrSize= 0
TerrSmooth=Off

[Menu]
MenuX=-51
MenuY= 12
MenuZ= 0